Lonking CDM 833 Wheel Loader Parts Combined Switch JK302N

Combined Switch Introduction 

Combination switch refers to a type of switch commonly used as a power source in electrical control circuits, which can be used to directly start or stop a low-power motor, or to make the motor forward and reverse, reverse, etc.
Combination switch, also known as conversion switch, is often used as a switch introduced as a power source in electrical control circuits. It can directly start or stop a low-power motor, or make the motor forward and reverse, reverse, etc. It is also commonly used to control local lighting circuits. Combination switches can be single pole, double pole, three pole, or four pole, with rated continuous currents of 10, 25, 60, 100A, and more. Combination switches can simplify control or measurement circuit circuits and to some extent avoid operational errors and errors.
In addition, the combination switch is divided into two handles and one button:
The left handle is a light control switch. Control turn signals, headlights, and other lighting. Before turning, pull the handle back and forth in the direction of the steering wheel to turn on the left and right turn signals respectively. Clockwise represents a right turn, and counterclockwise represents a left turn. At this time, the corresponding turn indicator light in the combination instrument should also be on. When a new car turns and the steering wheel returns to its original position, the handle will automatically return and the turn signal lights will automatically turn off. Some cars have lane changing gears. Just pull the handle forward (or backward) to turn on the turn signal lights, and when you release it, it will automatically return to its original position. Its end can be twisted around the axis of the handle to control other lights, and it is also divided into three gears: OFF neutral, all lights go out; It should be blocked here during the day; Headlamps on: Low beam lights on, other lights also on.
The right handle is the switch for the wiper and windshield washer.
There is a hazard warning flash button located in the center above the combination switch. Press down to turn on the hazard warning flash.
When using a car combination switch, the right side is usually the light. Turning one stroke to low beam, turning two strokes to high beam, and lifting it in its original state to momentarily high beam (overtaking light or warning light).

Combination Switch Function 

The function of the combination switch cannot be ignored during the driving process of a heay equipment, as it directly affects the safety of the driver and the comfort of passengers.

Front And Rear Light Control: Control the front and rear lights of the vehicle, including the activation and deactivation of low and high beams. Low beam headlights are usually used for night driving to provide illumination for the driver in front of them; High beam headlights can be used at night without street lights, increasing driving safety.

Turn Signal Control: The driver can control the left and right turn signals of the vehicle through a combination switch, reminding other road users to ensure safety when changing lanes or turning.

Wiper And Washer Control: When driving on rainy days, the driver can control the switch and speed of the wiper through a combination switch, as well as the water spray function of the washer, to help clear rainwater and dirt from the front windshield and improve driving safety.
Horn control: The driver can control the vehicle's horn through a combination switch and use it when it needs to attract the attention of other road users or when overtaking.

Other Functions: Depending on the design of different car models and brands, the combination switch may also control other functions such as entertainment devices such as radios and CD players, as well as some safety functions such as hazard warning flashers.
In short, the automotive combination switch is a very important component in the automotive electrical system, and its design, quality, and maintenance are directly related to driving safety and passenger comfort. Therefore, drivers should understand how to use and maintain the combination switch correctly to ensure its normal operation

why choose us

 

Elton(Jinan)Trading Co.,Ltd.

About us

 

 

Elton (Jinan) Trading Co., Ltd. is a modern company integrating precision research, high standard production, refined storage and logistics. We can provide high-quality Wheel laoder spare parts for the global market. We have established professional after-sales technical support team.It can also remotely analyze and solve customer parts problems and provide one-stop service to customers.

 

top service industries

 

 

qualified

We use first-class raw materials for production, and our products are inspected by professional quality inspectors before leaving the factory

 

Factory direct sales

We are a factory that directly sells products to maximize customer benefits

Professional Team Service

 

We have a rich sales team and a professional R&D team, which can provide customers with professional pre-sale services. On sale and after sale Order solutions

 

Fast Delivery

 After you made an order from us. We can send to your good within 2-5 working days.If you have agent, we can directly send to agent. If you have no agent and You will receive your goods within 15 working days via express.

How To Cooperate With Us?

You can please contact us via whatsapp,email,skype. If you finshed the payment. We will deliver your goods within 3 days.

Our address

No.28988 Jingshi Road, Huaiyin District,jinan City Shandong Province. cHINA

Phone Number

+86 15054107990

E-mail

Fok001@126.com